Cummins C Model Diesel Engine Turbocharger |
This Holset Model pictured here comes with a waste gate (the round housing top left). A boost line is connected to a diaphragm and when the pressure hits a pre-calibrated level the excess boost pressure is exhausted out at around 20 psi or higher. The compressor wheel seen here as well is driven by the exhaust turbine wheel on the opposite side, so it's a self driven unit.
This is pure genius and gives the engine the extra air intake volume to keep up with the fuel injection system. Both the compressor and turbine wheels should be checked periodically for wear on the shaft and if there is any scuffing on the turbo housing caused the blades making contact. You don't want one of these guys blowing up and debris getting into the intake.
1 comment :
Thanks for the post. My husband loves working on his diesel! He recently started doing hydraulic motor repair so he's always out working in the garage so that he can be the best at what he does. Thanks again for the post, I'll have to show this to him!
Post a Comment